Automatic Tuning; Tuning Operations; Manual Tuning - Yamaha Audio RX-V395 Mode D'emploi

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

AUTOMATIC TUNING

1
Select "TUNER" as the input source.
TUNER
2
Select the reception band (FM or AM) confirming it in
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
26

TUNING OPERATIONS

TAPE/MD
CD
PHONO
MONITOR
or
AUTO
DOWN TUNING UP
L R
1
3 2 4

MANUAL TUNING

1
Select "TUNER" as the input source.
TUNER
2
Select the reception band (FM or AM) confirming it in
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
Tune to a desired station manually.
* For a continuous tuning search, press and hold the
button.
Note
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
TAPE/MD
CD
PHONO
MONITOR
or
Turn the "AUTO"
indicator off.
DOWN TUNING UP