Display Panel - Yamaha Audio RX-V395 Mode D'emploi

DISPLAY PANEL

PRESET
MEMORY AUTO
#
~
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
Ÿ
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
!
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
⁄
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
@
Center channel mode indicators
The name of a selected center channel mode lights up only
when a program which uses Dolby Pro Logic Surround is
selected.
¤
EFFECT OFF indicator
Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.
18
~
TAPE MON
‹
Ÿ
STEREO
ms dB
kHz
MHz
0 20
PRO LOGIC CONCERT
ENHANCED VIDEO
$
#
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and the preset station number selector buttons.
‹
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
$
TAPE MON indicator
Lights up when the tape deck (or MD recorder, etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
button.
›
DSP program indicators
The name of a selected DSP program lights up when the built-
in digital sound field processor or the Dolby Pro Logic Surround
decoder is on.
! ⁄
@ ¤
SLEEP
NORM
WIDE
PHANTOM
l00
EFFECT OFF
MONO DISCO ROCK CONCERT
MOVIE TV SPORTS CONCERT HALL
›