Installation Instructions - GE IM-4D Manuel D'utilisation Et D'installation

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737)
In Canada, call 1.800.561.3344
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
for local inspector's use.
IMPORTANT –
•
codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level
basic mechanical and electrical skills.
• Completion time
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
Icemaker Kit
or
Visit our Website at:
or
Visit our Website at:
ARE YOU REPLACING AN
ICEMAKER WITH THIS KIT?
It's important that you use the water valve and fill tube
assembly that come with this kit, even though your
refrigerator may already have them installed.
The old valve will not allow enough water through to fill
the icemaker properly and will cause damage.
DAMAGE – SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made by
arrangement between customer and installer.
7
IM-4D
GEAppliances.com
geappliances.ca