G
®
KYMASGARD
GW1 - RS 485 - FEM
The KYMASGARD
®
GW1- RS485 - FEM is a device for on-wall installation. It serves as unidirectional or bidirectional gateway between radio
transmitters ⁄ radio receivers and bus systems on basis of RS485 communication. It enables receiving and transmitting of radio telegrams from all
radio transmitters that comply with the EnOcean protocol standard.
TECHNICAL DATA
Operating mode:
Rated voltage:
Current consumption:
Radio module:
Fusing:
Operating elements:
Connection:
Enclosure:
Dimensions:
Mounting:
Ambient temperature:
Humidity:
Protection type:
Standards:
®
KYMASGARD
GW1- RS485 - FEM – Gateway for RS485 - Bus
Type ⁄ WG02
GW1 - RS485 - FEM
G W1- R S 4 8 5 - F E M
Note:
Compatibility
receiving (from up to 30 radio transmitters) and transmitting
of radio telegrams according to EnOcean standard
10 - 24 V DC
45 mA at 12 V DC
TCM120
none
1 button ("LRN"),
5 LEDs
5-pole terminal screw
plastic, material ABS,
colour pure white (similar to RAL 9010)
85 x 91 x 27 mm (Frija 1)
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top ⁄ bottom in case of plain on-wall installation
–5...+40 °C (in operation)
5...90 % r.H., non-precipitating air
IP 20 (according to EN 60 529)
CE conformity, EN 090-2-2, EN 60669-2-1,
ROHS conformity according to Directive 2011 ⁄ 65 ⁄ EU
Type
Communication
Bidirectional
RS485
other gateways optional
all KYMASGARD
®
radio transmitters and radio signal receivers
Installation
On-wall
14
Rev. 2017 - V12 GB
Item No.
18 01-7429- 0021- 000
on request