Operation - auna PRO DisGo Box 100 Mode D'emploi

EN
22

OPERATION

Warning: Danger of electric shock
The appliance must under no circumstances be
exposed to fire. Do not open the housing of the
appliance.
First steps
• Connect the AC IN to a household mains outlet, using the supplied
mains cord. Or connect the DC 12V IN with a matching AC/DC adapter,
connecting the latter to a household mains socket.
• Switch the POWER switch on the rear to the AC position when using
the AC mains cord, switch to DC position when using an AC/DC power
adapter. Switch to OFF to turn off. Use the POWER/STANDBY button on
the device front panel or on the RC to switch the unit on/off.
• Select the desired function mode by pressing MODE repeatedly.
• Rotate the Volume knob to adjust the output volume.
• Optional: Connect other audio equipment such as PA or another
amplifier to the LINE IN.
• Connect microphones to the MIC1 and MIC2 sockets on the front. Turn
MIC VOL down completely beforehand.
• Connect guitars or other musical instruments to the GIT IN. Turn the GIT
VOL down completely beforehand.
Wireless microphoneConnect the AC IN to a household mains outlet, using
the supplied mains cord. Or connect the DC 12V IN with a matching AC/DC
adapter, connecting the latter to a household mains socket.