Tripp-Lite N484-00U Guide Rapide

High Density Copper/Fiber Cassette Solutions
Models: N484-00U (1-Cassette Capacity), N484-01U (4-Cassette Capacity),
N484-01U-MINI (4-Cassette Capacity; No Front Door; No Wire Management)
Models: N484-1M24-LC12, N484-2M12-LC12, N484-3M8-LC12, N484-3M8L12S, N484-2M24-6M12, N484-12LC,
Any new models, even if not listed above, will include this Quick Start Guide and can be installed by following its instructions.
Installing the Cable Management Bracket:
The panel rails on the back of the N484-01U enclosure contain mounting notches that allow the cable management bracket to be installed on
the top or bottom of the rails. Choose the top or bottom notches, insert the bracket into the notches, and slide the bracket inward to secure it
into place.
Installing the Panel Shield Bracket:
The N484-01U contains a shield bracket that attaches to the front of the enclosure. Mounting holes are located on the right and left front panel
rails for bracket attachment. To attach the bracket, pull on the pull tabs found on each side of the bracket to move the connected pins outward.
Then insert the bracket into the enclosure. Once the pins are lined up with the mounting holes on the panel rail sides, release the pull tabs to
lock the bracket into place. The bracket slides up and down to allow access to the enclosure or to shield it from contact.
Quick Start Guide
Modular Cassette Enclosures*
N484-12M12, N484-12M24, N484-12RJ
* This Quick Start Guide covers installation of all N484-Series enclosures and cassettes.
Español 3 • Français 5 • Русский 7
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
Cassettes*
1