Functions - SilverCloud YE910 Manuel Utilisateur

EN

FUNCTIONS:

- It supports electrical control or hand operation.
- It is compatible with door phones or access control systems.
INSTALLATION
- Use the included screws to install the lock body, cylinder and door holder. Leave at least 5 mm distance
between the lock body and the door holder.
- Using the included accessories, install the cylinder on the outer side of the door. The axis of the cylinder must
pass through the door up to the special hole in the lock body. To open the lock, a short turn of the key in the
cylinder is enough.
- The spring can be adjusted according to the weight of the door by adjusting the hexagonal nut. Adjust the
hexagonal nut with a spanner no. 12 if the lock cannot close.
- The deadbolts could change direction according to the opening direction of the door (left or right)
- Use 7 - 12 d.c. voltage and a power higher than 12 W to power the electric lock. By pushing the button, the
electric lock unlocks after 1 second.
NOTES:
- The maximum continuous power supply of the lock must not exceed 8 seconds.
- For safety and long usage, please use solid lubricant for the cylinder
EXAMPLE OF INSTALLATION
Warning: For the lock installation, call specialized personnel only.
2