BTI A18 BS-2 Notice Originale page 19

SPECIFIED CONDITIONS OF USE
The battery drill/screwdriver may be used for drilling and screwdriving for
independent use away from mains supply.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described under
"Technical Data" fulfi lls all the relevant provisions of the directives 2011/65/EU
(RoHs), 2014/30/EU, 2006/42/EC and the following harmonized standards have
been used:
EN 60745-1:2009 + A11:2010
EN 60745-2-1:2010
EN 60745-2-2:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:2015
EN 50581:2012
Ingelfi ngen, 2018-01-30
Andreas Krebs
Geschäftsführung
Authorized to compile the technical fi le
BTI Befestigungstechnik GmbH & Co. KG
Salzstraße 51
D-74653 Ingelfi ngen
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, after use, the battery packs have to be fully charged.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to
Dangerous Goods regulations. Transport preparation and transport are
exclusively to be carried out by appropriately trained persons and the process
has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to prevent
short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit situations that cause
high current draw, the tool will vibrate for about 2 seconds and then the tool will
turn OFF.
To reset, release the trigger.
445 273 - BTI-A18BS-2.indd 19 445 273 - BTI-A18BS-2.indd 19
Stefan Haug
Anwendungstechnik
Under extreme circumstances, the internal temperatur of the battery could
become to high. If this happens, the battery will shut down.
Place the battery on the charger to charge and reset it.
MAINTENANCE
Use only BTI accessories and spare parts. Components whose replacement has
not been described, can be exchanged at the BTI after sales service. (BTI
Befestigungstechnik GmbH & Co. KG · After Sales Service · Salt Road 51 ·
74653 Ingelfi ngen · Tel 07940 / 141-870, -872, -873 or -886 · Fax 07940 /
141-875)
If needed, an exploded view of the tool can be ordered. Please state the
ten-digit No. as well as the machine type printed on the label and download the
drawing at BTI Homepage www.bti.de > Service > Explosionszeichnungen und
Ersatzteillisten > BTI > Akku-Geräte or order directly at BTI Befestigungstechnik
GmbH & Co. KG, After Sales Service, Salzstraße 51, 74653 Ingelfi ngen.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work
on the machine.
Please read the instructions carefully before
starting the machine.
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the
firm BTI.
BTI after sales service can be reached at the following contact
information: BTI Befestigungstechnik GmbH & Co. KG · After Sales
Service · Salz Straße 51 · 74653 Ingelfi ngen · Tel 07940/141 - 874
· Fax 07940 / 141-9874
The warranty period of 36 months for tools and 12 months for
batteries and chargers starts on the date of purchase which must
be verifi ed using the original receipt. During the guarantee period
the producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment
or excessive force are not covered by the warranty. Furthermore,
only original accessory parts may be used, which BTI has
expressly identifi ed as suitable for the operation with BTI
machines.
You can fi nd out the location of your nearest customer service
workshop in the address list at the back of this document.
19 ENGLISH
30.01.2018 13:07:05 30.01.2018 13:07:05