Mounting Instructions - DURAVIT Blue Moon 760143 Notice De Montage

Important information
Mounting instructions information
These mounting instructions come as part of the Duravit
whirltub and should be read carefully prior to installation.
Explanation of the key words and symbols
Indicates a hazardous situation which, if
DANGER
not avoided, will result in death or serious
injury.
Is used to address practices not related to
NOTICE
physical injury.
Link to the Electrical installation section
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Indication of the temperature
Target readership and qualifications
The whirltub must only be installed by trained plumbing
engineers. The electrical installation should only be carried out
by qualified electricians.
Risk of product and/or property damage!
NOTICE
> Observe the local installation regulations and any country-
specific standards at all times.
Safety instructions
DANGER
Risk of fatal electric shock!
> Do NOT remove any whirltub components.
6
WH_M_BlueMoon_FST_with panel/17.10.2

Mounting instructions

Please read pre-installation information sheets prior to the
installation. These are available to download on the Internet at
www.duravit.com.
If the tray has a base inlet, a pipe
NOTICE
Seitenansicht
interrupt must always be installed on-
site. (DIN EN 61770, DIN EN 1717)
> See installation diagram.
Checking the whirl system (Diagram 16)
16
> Switch on the whirl system for 10 minutes:
Run this through once completely in the case of
circuits with different levels of intensity.
Technische Verbesserungen und optische Ver nder n en
We re er e t e r t t e technic r e ent
Datum Name Ma§stab Artikel-Nr.
> Leave the water in the bathtub and wait 10 minutes.
Date Scale Model-No.
Gezeichnet Name
08.10.13 er 1:20
Drafted
> Check to make sure that it is leak-tight.
GeprŸft Bezeichnung
08.10.13 WLT 1:10 X
Certified
Description
Ge ndert
1:5
> If adjustments are required, repeat the check.
Modified
Inspection hatch (Diagram 19)
19
> The bathtub panel must be accessible and
removable for maintenance.
> Remove the panel with a vacuum suction cup for
maintenance.
(Order number of installation set for free-standing
whirltubs: 790850 00 0 00 0000)
Lateral view
n den e deten r d ten e ten r n r.
nd en n e t e e r n e t e r d t n
Zeichnung
000000 # W-T- 000000 - 00 - 0
Drawing
e t e e n n t r nter recher
Spezial Ab-und †berlaufgarnitur mit Bodenzulauf
fŸr Badewanne
Special waste and overflow with base inlet
for bathtubs