Kawai F-302 Mode D'emploi page 3

3. Mounting the digital piano onto the stand
(HM-5)
Place the digital piano so that the screw holes on the
bottom of the digital piano and the holes on the brackets of
the HM-5 stand match.
5. Connecting the pedal cable
5- 1
Connect the pedal cable extending from the rear of the
pedal board to the pedal terminal of the digital piano.
5- 2
Secure the cable with the cable clamp attached to the
HM-5 stand.
6. Adjusting the adjustor
Turn the adjustor it fi rmly makes contact with the fl oor.
* Depending on the material and condition of the fl oor,
a friction noise may occur between the fl oor and the
pedal support bolt when the pedal is depressed. In
that case, adjust by placing a piece of felt or carpet
between the fl oor and the pedal support bolt.
4. Attaching the digital piano to the stand
(HM-5)
Firmly tighten and fi x the four knobs attached to the HM-5
stand.
1
2
3