Before First Use; Use; Care And Cleaning - Genius X-UV light Mode D'emploi

3 Before first use

CAUTION!
Danger of suffocation
Children can get caught or suffocate in the packaging film!
Keep children away from the packaging material.
Check the set to ensure that it is complete and no damage has occurred in transit.
Remove the packaging material and any stickers attached to the product for protection during transit or
for advertising purposes.

4 Use

Note: A detailed description of the Invictus handheld device can be found in the
Instruction manual of the respective battery-powered vacuum cleaner.
Connect the UV light brush to a handheld device from the Invictus X series (Fig. 1).
„
Place the UV light brush flat on the surface to be cleaned (Fig. 2).
„
Switch on the device by pressing the on/off switch on the handheld device.
„
The UV light brush can be used with or without boost mode.
Move the device evenly over the surface to be cleaned.
„
The infrared sensors on the underside of the UV light brush detect whether the
„
brush is resting on a surface. As soon as the brush is lifted from the surface, the
UV-C lamp automatically switches off. The control light on the top also then goes out.

5 Care and cleaning

WARNING!
Irreversible electric shock injuries
Switch off the device Before cleaning or user maintenance and unplug the power cord.
Never hold the device under running water or immerse it in water or other liquids.
NOTE!
Do not use abrasive cleaning agents to clean the housing. They could damage the surface.
Note: Detailed cleaning instructions for the Invictus handheld device can be found in the Instruction
manual of the respective battery-powered vacuum cleaner.
Disconnect the UV light brush from the handheld device for cleaning. To do this, press the orange release
button.
Clean the housing by wiping it with a damp cloth.
Instruction manual
GB
13