Battery Tool Use And Care; Service; Special Warnings - Greenlee GATOR EK622CVX Mode D'emploi

with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the BATTERY pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.

Battery Tool Use and Care

Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
BATTERY pack may create a risk of fire when used with
another BATTERY pack.
Use power tool only with specifically designated
BATTERY packs. Use of any other BATTERY packs
may create a risk of injury and fire.
Greenlee Tools, Inc.
Gator Insulated Battery-Powered In-Line Crimper
®
5
When BATTERY pack is not in use, keep it away
from other metal objects, like paper clip, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the BATTERY terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
from the BATTERY; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the BATTERY may cause irritation or burns.
Do not use a BATTERY pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
EXPLOSION or risk of injury.
Do not expose a BATTERY pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge
the BATTERY pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.

Service

Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tools is
maintained.
Never service damaged BATTERY packs. Service
of BATTERY packs should only be performed by
manufacturer or authorized service providers.

Special Warnings

Hydraulic tools can be heavy and might require
additional support. Never overestimate your ability to
handle the tool.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070