Specific Safety Rules And Symbols - Greenlee UT10 Ultra Tugger Manuel D'instructions

SPECIFIC SAFETY RULES AND SYMBOLS

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning will
result in severe injury or death.
Greenlee Tools, Inc.
Ultra Tugger
SAFETY
ALERT
SYMBOL
®
10 Cable Puller and Pulling Packages
Do not operate the cable puller in
a hazardous environment. Hazards
include flammable liquids and gases.
Failure to observe this warning will
result in severe injury or death.
Do not mount puller as shown above.
Inside of capstan should be centered over conduit.
The chain mount could break away from the mount-
ing, causing severe injury or death.
Electric shock hazard:
Disconnect the cable puller from the
power supply before servicing.
Failure to observe this warning could
result in severe injury or death.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070