Dacor DRF42 Serie Mode D'emploi page 38

Operations
Door bins
Drawers
To remove, gently lift up the front of the drawer and slide out. We recommend that you
remove the door bins before removing a drawer. This is to prevent damage to the door
bins.
Pulling a drawer
38 English
Dacor_T-TYPE_BRF9000M_DA68-03574F-00_EN.indd 38
To remove, lift up the door bin, and then
pull out straight.
The door bin may not move easily the
first time you try to remove it. If this is
the case, remove the inner cap of the door
first, and then try again.
CAUTION
The door bin has 4 fitting holes, 2 for each
side. When reinserting the door bin, make
sure the 2 holes on one side of the door
bin fit into the 2 guiding fittings on the
corresponding side of the door. In short,
the 4 holes of the door bin fit in the 4
fittings of the door. If you do not match
the holes to the fittings, you cannot insert
the door bin so that it is level.
Removing a drawer
2017-09-20 6:32:22