Glen Dimplex EWT Ventilec Manuel D'utilisation page 14

E. Speed control
F. Timer control
G. Ventilation mode control
H. Appliance On/off
I. « Timer » indicator
J. « Ventilation mode » indicator
K. « Speed » indicator
Appliance On/Off (A)
After plugging the appliance in, press the
the appliance on.
Press it a second time to switch the appliance off.
When you use the appliance for the first time, it will be set
by default to operate in Normal ventilation mode on medium
speed and without use of the timer function.
This will be shown by the indicator lights located on the LED
display screen (17).
When you next use the appliance and as long as you have
not unplugged the electrical cable, the appliance will begin
functioning on medium ventilation speed and will then
14
Ventilec.indd 14
switch to the ventilation speed selected the previous time
the appliance was used.
Speed control
Ventilation speed can be adjusted by pressing the
Every time you press this button, the speed of the appliance
changes as follows:
the button while the appliance is set to fast speed will
begin the cycle again starting with low speed.
A light indicator on the LED display screen will indicate the
ventilation speed selected.
Timer control
When the appliance is switched on, the default mode does
not trigger use of the timer.
The timer is activated by pressing the
be set to stop the appliance from operating after: 1H, 2H, 4H
or 8H. The corresponding indicator light on the LED display
screen will light up according to the time selected.
Every time you press the
the time in the following order:
1H Æ 2H Æ 4H Æ 8H Æ Timer off.
The hours indicated do not accrue.
Ventilation mode control
When you switch the appliance on for the first time, the
ventilation mode will be set to Normal by default.
The ventilation mode can be set by pressing the
Every time you press this button, the appliance will select the
ventilation mode in the following order:
Natural Mode Æ
When the appliance is set to
button
Normal Mode :
When this mode is activated, the
up on the LED display screen.
Depending on the speed selected – slow, medium, fast –
ventilation speed will not vary and will continue uninterrupted.
Natural Mode:
When this mode is selected, the
on the LED display screen.
When this mode is selected on Fast speed, ventilation speed
will alternate randomly between Fast, Medium and Slow
button to switch speeds.
When this mode is selected on Medium speed, ventilation
speed will randomly alternate between Fast, Medium and
Slow speeds.
When this mode is selected on Slow speed, ventilation speed
will alternate randomly between Medium and Slow speeds.
Sleep Mode:
When this mode is activated, the
up on the LED display screen.
FR
SlowÆ MediumÆ
button, the appliance will select
Night Mode.
Night Mode, press the
to return to Normal Mode.
light indicator will light
light indicator will light up
light indicator will light
www.ewt-france.com
EN NL
Sleep M
30 min
on Med
mode
button.
Sleep M
Fast. Pressing 30 min
in Natu
Sleep M
Slow sp
TELECO
button which can
button.
Normal Mode Æ
A. Mise
B. Cont
C. Cont
D. Cont
1. Whe
2. Rem
3. Whe
www
28/11/18 15:30
diag
with
on y
insid
the
prev