Phonocar VM488 Notice De Montage Et D'emploi page 8

APP ANDROID: Phonocar WI-FI rear camera
1) Camera image.
2) Recordings made.
3) WI-FI Red = room in connection.
WI-FI Green = connected room.
APP ANDROID
EVENT
Opening PHONOCAR APP
Device Ignition-key activation
Smartphone Reverse gear engagement The camera sends the picture to the smartphone.
PHONOCAR APP in the background The smartphone keeps HOTSPOT active and it
PHONOCAR APP closed
PHONOCAR APP reopened
OUT FROM THE VEHICLE
1
2 4
3
4) Return to the previous screen.
5) Delete records.
PHONOCAR WI-FI REAR CAMERA"
GOOGLE PLAY: "
HOTSPOT CAMERA FUNCTION
Timer activation and switching on of the camera router
The smartphone activates the HOTSPOT function and connects to the
camera. The WI-FI function is deactivated (if active).
If the connection is not yet active, the device
continues to perform the same function. If, instead, the device is
already connected, it waits for the engagement of the reverse gear.
At the same time static guidelines will be displayed.
is ready to receive the rear image, once the reverse gear has been
engaged.
When you leave the APP with the key
closes and the smartphone will disable the HOTSPOT function, thus
disconnecting the connection with the camera.
The smartphone reactivates the HOTSPOT function and searches for
the connection with the camera, returning to the mode
"Ready for the reverse gear". The WI-FI function is
deactivated again (if active).
The system remains on for 60 minutes after having closed the ignition
key, so as to maintai the possibility to connect the smartphone, if it is
within range of the camera (approx. 10 meters).
In this way, activation times of the system are reduced.
After 60 minutes, the system switches off.
8
5
, the app completely
GB