What's In The Box - Play2Run AE20 Guide De L'utilisateur

English

► What's in the box

®
• Play2Run AE20 speaker
• USB charging cable
• Jack-Jack 3,5 mm audio connector
• Carry pouch
• User guide
► Quick start guide
Bluetooth ® pairing
Make sure that no cable is connected to the 3.5 mm audio jack.
Turn the speaker on by pressing more than 8 seconds on the multifunction button.
The LED should flash red and blue. The AE20 is now ready to connect to your Bluetooth
transmitter.
Search on your Bluetooth® transmitter the Play2Run-AE20 and follow the instructions of your
device.
The pin code is 0000 (some devices do not require this code)
Your speaker AE20 is now ready to be used with Bluetooth
Using a Bluetooth
®
Receiving a call :
Short press the multifunction key to receive an incoming call.
Ending a call :
Short press the multifunction key to end a call.
Answer a call in audio playback mode :
Short press the TEL key to receive an incoming call. Playback will pause during your conversation
and restart automatically at the end of your call.
Rejecting a call :
Press 2 seconds the multifunction key to reject a call..
Redialing the last number :
To redial the number you last called (if your phone support this feature), when no call is in
progress, press the multifunction key twice.
Phone conversation :
The microphone is located on the front of the enclosure stay close for clarity.
You can increase or decrease the volume with the + and - buttons.
You can use the Mute button (mute) to temporarily mute the microphone.
► Front function description
Previous
Speaker
ON/OFF
Multifunction
key
mobile phone
Play/Pause
LED
Vol -
®
.
Vol +
Next
Mute
®