Soundcore Infini Pro Mode D'emploi page 12

a. Connect to your TV
HDMI ARC connection (For TVs that support ARC)
Note: The Audio Return Channel (ARC) function enables an HDMI compatible TV to
send the audio stream to HDMI OUT of the unit.
1. Connect HDMI cable to the HDMI OUT (ARC) port on the rear of the soundbar.
2. Connect the other end of the HDMI cable to the HDMI IN ARC port on the TV.
3. Tap the source input button on the soundbar or remote control to activate the
corresponding mode.
Optical connection (For TVs that do not support ARC)
1. Connect the optical cable to the TV IN (OPT) jack on the rear of the soundbar.
2. Connect the other end of the optical cable to audio output jack on TV.
3. Tap the source input button on the soundbar or remote control to activate the
corresponding mode.
Note: The TV IN (OPT) jack cannot be used when a TV that supports the Audio Return
Channel is connected to the soundbar.
EN
06