Zwilling 53011-001 Mode D'emploi page 5

US
Use
1 Before first use/Charging the battery
Before using the scale for the first time or when the battery is low, you will need to charge the
battery using the supplied USB charger cable. To do this, connect the charger cable to a power
source (e.g. computer, USB charger) via a USB port. When the display flashes, charging is com-
plete.
2 Switching on and using the appliance
To switch on the scale, place it on an even surface and press the control panel. As soon as the
weight on the display reads zero, the scale is ready for use. If you want to weigh items in a bowl
or other container, you must either place the container on the scale before switching it on or tap
the control panel before weighing to reset it to zero.
www.zwilling.com
While the appliance is
charging, a dash on
the display will move from
right to left.
Use
5