Operation; Energy Saving Tips - Mobicool F16 AC Mode D'emploi

F16 AC
6

Operation

!
WARNING! Fire hazard!
 When positioning the device, ensure the supply cord is not
trapped or damaged.
 Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the device.
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 11).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
6.1

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
EN
Operation
9