SMP301-02/-03
Electrical cables
!
CAUTION!
• Lay the cables so that they cannot be tripped over or damaged.
• Have damaged power cables replaced by a specialist in accordance
with national regulations.
A
NOTICE!
• If cables have to be fed through metal walls or other walls with sharp
edges, use ducts or bushings to prevent damage.
• Do not lay cables which are loose or bent next to electrically conduc-
tive material (metal).
• Do not pull on the cables.
• Do not lay the AC cable and the DC cable in the same duct.
• Fasten the cables securely.
2.3
Operating the product safely
!
WARNING!
• Operate the product only if you are certain that the casing and the
cables are undamaged.
• Always disconnect the power supply when working on the product.
A
NOTICE!
• Make sure the ventilation grilles in the product are not covered.
• Ensure good ventilation.
3
Scope of delivery
• Power supply unit
• Installation and operating manual
EN
Scope of delivery
9