Troubleshooting; Warranty - Dometic SMP 301-02 Instructions De Montage

Troubleshooting

9 Troubleshooting
Fault Cause
No power from The plug-in fuse of the related 12 V
output (e.g. fig. 1 1, page 3) is defec-
12 V outputs
when unit is tive. The red LED next to the plug-in
operating in fuse lights up.
mains supply
The power supply unit has switched off
mode.
as a result of the surge protector. The
red LED (fig. 5 1, page 5) lights up.
No power from The plug-in fuse of the related 12 V
output (e.g. fig. 1 1, page 3) is defec-
12 V outputs
when unit is tive. The red LED next to the plug-in
operating in fuse lights up.
battery mode.
The battery has been connected
incorrectly.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
18
SMP301-02/-03
Remedy
Replace it with a plug-in fuse of
equivalent quality.
The surge protector resets itself
automatically as soon as the
voltage returns to a permissible
value. If this is not the case,
contact a specialist electrician.
Replace it with a plug-in fuse of
equivalent quality.
Connect the battery correctly
(chapter "Connecting the power
supply unit" on page 14).
Contact an electrician,
if applicable.
EN