Customer Services - KRAFTWERK 3972 Mode D'emploi

PRECAUTIONS FOR USE
Exceeding the maximum cpacity could cause serious injuries!
ASSEMBLY
OPERATION
Check the function and the completeness of all parts of the jack stands before each use.
- The legs of the jack stands must be completely unfolded.
- Check that the holding bolt is correctly seated and secure it against slipping out with the safety pin.
- Assure that surface under the jack stands is flat and stable.
- Position the jack stands under the vehicle at the lifting points indicated by the manufacturer.
- Lower the load carefully until it is fully laying on the jack stands.
- After using the jack stands: When removing the holding bolt, hold onto the middle pole so that this does not
fall down through the middle hole.
TECHNICAL SPECIfiCATIONS
Art. Capacity
3972 2 T
WARRANTY
We do not take responsibility for any damage caused by misuse or any use that is not in compliance
with the safety standards described herein.

CUSTOMER SERVICES

Contact your local importer of your specialized dealer to obtain address of our service department.
Min. Max.
276 mm 363 mm
FROM DATE OF PURCHASE RECEIPT
2 YEAR GUARANTEE
ON MATERIAL OR PRODUCTION DEFECTS
4
Weight
3 kg