Garlando Open Air Guide D'assemblage page 21

Assembly of ball bearings
WARNING !
INT
Side of the bearing that must
look towards the playfield.
Place the inner and outer half bearing retainers at the handle side following the instructions below.
2AN201-21
Outer half bearings retainers
Insert the roller bearing 2AN201-1 onto the bar at
the handle side (no roller bearing must be installed
at the telescopic side) by sliding it until it is inside
the cabinet.
2AN201-24
Inner half bearings retainers
2AN201-1
Roller Bearing
"A" + "B"
21