Maintenance And Cleaning - D+H GE 650 Notice Originale

Intended use
- Group plug-in set for RZN 43xx-E
- For controlling 230V SHEV drives
- Line monitoring in accordance with prEN 12101-9
- SHEV re-clocking function
- For capacitive and inductive loads
- D+H 230 VAC drives with SHEV fast mode (HS)
are supported
- Controlled by standard line plug-in LE 513
- Can be combined with all 24V group plug-ins
- Adjustable ventilation stroke limitation 2 ... 60 sec.
- Adjustable ventilation time limitation 2 ... 45 min.
Safety notes
Operating voltage 230 VAC!
Risk of injury from electric shock!
- Connection must be carried out by a certified
electrical technician
- Suitable for indoor mounting only
- Do not lay 24 VDC and 230 VAC cables in the
same cable duct!
- Use unmodified original D+H parts only

Maintenance and cleaning

Inspection and maintenance has to be carried out
according to D+H maintenance notes. Only original
D+H spare parts may be used. Repair is to be carried
out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2004/108/EC, 2006/95/EC
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Thomas Kern
Member of the Board
22.12.2010
99.824.62 1.1/06/12
Maik Schmees
Authorized signatory, Technical Director
Technical data
Groupe module GM 650 :
Nominal voltage
Rated power
Nominal output voltage
Nominal output current
Max. number of drives
GE 650 group plug-in :
Nominal voltage
Power consumption in
the event of power failure
Maximum permissible number of GE 650 on one
power supply plug-in: VE 520 = 10, VE 530 = 15
If additional modules are used, then the power
consumption may have to be determined in
individual cases.
End module EM 650 :
Dimensions (W x H x D)
Scope of supply
- GE 650 group plug-in
- Groupe module GM 650
- End module EM 650
- Ribbon cable 1500mm
Guarantee
You will get 2 years guarantee
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
Disposal
Electrical devices, accessories and packaging
should be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose electrical
devices into household waste!
According the European Guideline
2002/96/EC for waste electrical and
electronic equipment and its implemen-
tation into national right, electrcal
devices that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
English
: 230 VAC
: 2300 VA
: 230 VAC
: 10 A
: 45
: 24 VDC
: 3,5 mA
: 54 x 45 x 37 mm
for all D+H products
an
5/16
GE 650 Set