Adjusting The Speed - SOLAC BE7855 Mode D'emploi

PREPARING THE BRONZE AIR PERFECTION
SPRAY GUN
• Place the spatter guard (2) on the mouth of the spray gun (Fig. 2)
• Put on the gloves before handling the lotion (Fig. 3)
• Remove the lotion receptacle (5) (Fig. 4)
• Open the receptacle lid (6) (Fig. 5a)
• BEWARE! Do not pull too hard or towards the front; you can cause damage
to the lid. (Fig. 5b)
• Pour lotion into the receptacle (Fig. 5c). You can add lotion up to the Maxi-
mum mark (MAX). You can tan your whole body with approx. 30-50 ml.
• Close the receptacle lid (6) (Fig. 6a)
• Insert the spray gun's tube (10) (Fig. 6b)
• Close the spray gun (Fig. 6c)

ADJUSTING THE SPEED

The spray gun has two speed positions:
1) Speed position 1: Slower, ideal for smaller skin areas requiring more preci-
sion (e.g. face and neckline).
2) Speed position 2: Faster, ideal for large skin areas like the legs.
To select the speed, turn the speed selector (4) (Fig. 7)
APPLICATION
• The spray gun's operation is highly intuitive. Once the receptacle (5) is closed
it serves as a handle, and the pushbutton (3) is like a trigger.
• To spray on the lotion, gently press the pushbutton down (3). (Fig. 8)
• To stop spraying, stop pressing the pushbutton (3).
• For perfect results, it is advisable to use the gun at a distance of approxi-
mately 15 cm from the skin (Fig. 9).
• The gun should always be in motion while applying lotion. Move it slowly
and gently, without any hurries, making sure you cover the entire area to
be tanned.
• CAUTION! Never leave the spray gun in a fixed (motionless) position. If you
do, the lotion will concentrate in the area you're pointing at, darkening the
skin area involved more than the rest. If the spray gun drips, remove any
excess lotion with a towel previously dampened in water or a cosmetic
sponge. Never use paper paste-based products.
14
Pistola Autobronceadora ok 14 5/7/06, 12:46:13