Dry-Ironing; Cleaning, Maintenance & Storage - Princess 322413 Mode D'emploi

HOW TO USE
Filling the water reservoir
Fill the reservoir with water using the cup. Never fill beyond the Max level.
Selecting the temperature
Turn the temperature dial clockwise to increase the temperature.
Turn the temperature dial counterclockwise to decrease the temperature.
GARMENT
LABEL
Steam function
Turn the steam switch to the horizontal position for continuous steam. Only for horizontal use.
Turn the steam switch to the "0" position and push the extra steam jet button for a blast of steam. After
filling, you may have to press the extra steam jet button a few times to pump up the water.
Warning: the iron generates steam continuously only when used horizontally. You can stop the continuous
steam function by placing the iron in a vertical position or by moving the steam switch to the "0" position.
You can only use the steam function at the highest temperature. If the selected temperature is too low,
water may start dripping.
Spray function
Make sure that there is water in the reservoir. Press the spray button slowly (for a dense spray) or quickly
(for a vaporized spray).
Warning: for delicate fabrics, we recommend moistening the fabric before using the spray function, or
putting a damp cloth between the iron and the fabric. To avoid staining, do not use the spray on silk or
synthetic fabrics.
STEAM IRON
- Unwind/unroll the cord completely. Always remove the plug from the socket before filling the reservoir.
- Fill the reservoir with water. Never fill beyond the Max level.
- Place the iron on a flat and stable surface.
- Insert the plug into the outlet.
- Turn the temperature dial to the desired temperature setting. The indicator light will turn on, indicating
that the iron is heating up.
- You can start steam-ironing as soon as the indicator light turns off. While you are ironing, the indicator
light will turn on and off. This is normal and indicates that the thermostat is working correctly.
- When you have finished ironing, turn the temperature dial to the Min before unplugging.
- Place the iron on the flat surface and allow it to cool off completely.
USING THE SPRAY BUTTON
You can use the spray button if there is enough water in the reservoir. This can be done both while
dry-ironing and steam-ironing. While ironing, press the spray button a couple of times to activate the
pump. The next time you press the button, the iron will emit a fine mist.

DRY-IRONING

Put the steam switch in the "0" position. Turn the temperature dial to the required setting.
The indicator light will turn on. You can start dry-ironing as soon as the indicator light
turns off.
CLEANING, MAINTENANCE & STORAGE
1. Unplug the iron and allow it to cool off completely before cleaning it.
2. Wipe off lime and other deposits with a damp cloth and a non-abrasive cleaner; never
scratch the soleplate with metal objects.
3. Never pour vinegar into the water reservoir.
TYPE OF FABRIC
synthetic
silk - wool
cotton - linen
Fabric not to be ironed
TEMPERATURE
* low temperature
** medium temperature
*** high temperature
7