etp HYLOC Série Notice D'utilisation page 9

Connecting the pump
1. Remove the protective caps of the quick connections.
2a. Connect return hose of the pump to the on-port.
note: The return hose or other connection should be
made to the on port because a heavy spurt of oil can
occur when ETP-HYLOC loosens.
2b. Connect pressure hose of the pump to the P-port.
2c. Connect pressure hose of the pump to the
off-port.
Pressurising
Before pressurising, make sure that the steel plugs
are fitted into the three ports not in use.
3a. Close the pressure reducing valve at the pump.
DIsmountInG
9