Product Description; Pack Contents; Cleaning, Care & Maintenance - Buffalo CK915 Mode D'emploi

Product Description

CK915 Buffalo Heated Display Merchandiser 25 litres
CK916 Buffalo Heated Display Merchandiser 45 litres

Pack Contents

Buffalo Heated Display Merchandiser
Water Tray
Installation
• Remove all packaging and dispose of it safely.
• Wipe all surfaces with a clean, damp cloth before use.
• Position the Merchandiser on a level and stable surface, insert the shelves on to the shelf
supports, add water to the Water Tray if humidification is required, taking care not to overfill.
• There should be at least 100mm clearance on all sides, do not place objects on top of the
Merchandiser at any time.
Operation
• Add water to the Water Tray if humidification is required, then place the Tray in
position inside the Merchandiser.
• Connect the Merchandiser to electricity by inserting the plug in to a socket, turn on
supply at socket. Turn switch at the rear of the Merchandiser to the on position, this
will start the heating element. Rotate the knob at the rear of the Merchandiser to set
the temperature.
• The Merchandiser is now ready for food to be displayed and kept warm.
Cleaning, Care & Maintenance
• Remove any food debris that is present in the Merchandiser after use.
• Ensure the merchandiser is switched off before cleaning internal surfaces with a cloth that is
damp with soapy water, or with a food safe cleaning agent, dry thoroughly after cleaning
making sure that no moisture is left in the Merchandiser.
1 x Shelf (CK916 only)
Instruction Manual
UK