Petra electric IceCrusher IC 10 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
in your plug, proceed as follows:
-the wire which is coloured blue
must be connected to the terminal
which is marked the letter N or
coloured black,
-the wire which is coloured brown
must be connected to the terminal
which is marked with the letter L or
coloured red.
Do not connect any wire to the
terminal which is marked with the
letter E or by the earth symbol , or
coloured green or green and yellow.
If a 13 A (BS 1363) plug is used it
must be fitted with a 3 A fuse con-
forming to BS 1362 and be ASTA
approved. If any other type of plug
is used, the appliance must be pro-
tected by a 5 A fuse either in the
plug or adapter or at the distribution
board. If in doubt - consult a quali-
fied electrician.
Never use the plug without closing
the fuse cover.
The appliance complies with
the EC regulations No. 73/23
EWG and No. 89/336 EWG.
Subject to technical changes.
Proper dispose of packing material.
5

Publicité

Table des Matières
loading

Produits Connexes pour Petra electric IceCrusher IC 10

Table des Matières