Télécharger Imprimer la page

Mounting Instructions - Wieland SLX-COL-0900 Instructions De Montage

Publicité

Montageanleitung (Original)
SLX-COL

MOUNTING INSTRUCTIONS

Schritt/Step 1
Schritt/Step 2
© Wieland Electric GmbH
Wieland Electric GmbH
Brennerstraße 10-14
96052 Bamberg/Germany
Ph.
+49 (0) 951 9324-999
Fax
+49 (0) 951 9324-198
Internet: www.wieland-electric.com
Email: safety@wieland-electric.com
MONTAGEANWEISUNG
GERÄTESÄULE SLX-COL FÜR MEHRSTRAHL-
SICHERHEITS-LICHTSCHRANKEN UND LICHTVORHÄNGE
Arbeitsschritte:
1.
Säulen am Boden befestigen
Bestimmen Sie den Befestigungsmittelpunkt der Säule
anhand der Bodenplatte und markieren Sie diesen auf dem
Boden.
Setzen Sie die Bohrschablone auf den Mittelpunkt auf,
richten Sie sie aus und markieren Sie die Bohrungen.
Bohren Sie die Befestigungslöcher nach Anweisung und
setzen Sie die Bodenanker ein.
Setzen Sie die Säulen auf und schrauben Sie diese fest.
2.
Säulen ausrichten
Justieren Sie die Säule mit Hilfe der Libelle (1) grob.
Justieren Sie die Säule an den Justageschrauben (2) mit
Hilfe der Wasserwaage in eine senkrechte Position.
Lösen Sie die Inbusschrauben (3) und justieren Sie die
Säule axial.
Libelle
Justageschrauben
Inbusschrauben
Bohrungen für Bodenanker, Ø 10 mm
Kunststoff-Federelement mit selbsttätiger Rückstellung
BA000918 (Rev B) 2014/04
DE
MOUNTING INSTRUCTIONS
SLX-COL DEVICE COLUMN FOR MULTIPLE LIGHT BEAM
SAFETY DEVICES AND LIGHT CURTAINS
Work steps:
1.
Fasten the columns on the floor
Use the base plate to determine the mounting mid-
point of the column and make a mark on the floor.
Set the drilling template on the center point, align it
and mark the bore holes.
Drill the fixing holes according to instructions and
insert the floor anchors.
Set the columns up and screw them on firmly.
2.
Adjust columns
Roughly align the column using the spirit level (1).
Align the column to the alignment screws (2) in a
vertical position using the spirit level.
Loosen the Allen screws (3) and align the column
axially.
Spirit level
Alignment screws
Allen screws
Bore holes for floor anchors, Ø 10 mm
Plastic spring element with automatic resetting
EN
Doc. # 700169

Publicité

loading