Solving Problems - Graco Ultraclear 2755 Manuel D'utilisateur

Solving Problems

DO NOT ATTEMPT TO MODIFY THE UNIT.
Any modifications to the transmitter and/or receiver can
void the operator's authority to operate the equipment.
Most problems have a simple solution.
First, check that:
• Power is turned ON for both units
• Both units are plugged in (or battery is fresh in Parent's Unit)
• Electrical outlet works
• Units are set to same channel
• Volume is turned up on Parent's Unit
• Parent's Unit is in range of the Nursery Unit
No Sound
• Battery dead or weak — replace batteries or use AC adapter.
• Channel settings do not match — set both units to same channel.
• AC adapter not properly connected — check the connections.
• Nursery Unit covered or blocked — remove the obstruction.
Weak Sound
• Parent's Unit too far from Nursery Unit — move closer.
• Large objects blocking the signal — try repositioning Nursery Unit.
• Check that antennas are vertical and are not touched by other objects.
• Volume setting too low — turn it up.
9