Automatic Mode; Absence Mode - Elesta RTU200B Mode D'emploi

Automatic mode

Turn the knob to AUTO.
Time
Measured
temperature
Absence
mode
Comfort or economy
manual mode
(up to program change)
When starting up, the set-point temperature is displayed.
i
Press the button to display the temperature measured
by the thermostat (the symbol
the °C).
• The temperature display can be reversed
(CF02 start up menu):
- automatic mode : measured temperature
i
- press : set-point temperature
• If you do not want to use a program, you can go to
continuous Economy mode (knob turned to
continuous Comfort mode (
Protection mode ( ).
Current setting
(e.g. comfort)
Day
Heating
demand
mode
Manual temperature mode
(from 30 minutes to 72 hours)
is displayed above
),
) or continuous Frost
- 32 -

Absence mode

This mode is used to set a tempe-
rature (5 to 15°C) for a period that
can be set from 1 to 365 days.
From the automatic mode (AUTO),
press the button.
The number of days flash on and
off.
Press + or - to set the number of
days.
Example: leaving on 10 January,
returning on 19 January, indicate 9
days.
Automatic operation will restart on
19 January at 00.00 h.
Press OK to confirm.
The temperature flashes on and off.
Press + or - to set the temperature.
Press OK to confirm.
To cancel the absence mode (e.g. when returning
early), press the C button or turn the knob.
In COOL mode, the absence mode shuts down the
heat pump. No set-point setting possible.
The screen displays "- - - -".
- 33 -