Initial Setup; Language Settings; Wifi - Renkforce 1317447 Mode D'emploi

10. Initial setup

a) Language settings
• To set the language to your local language, open the settings first. For this, click the
gear icon on the home screen.
• Navigate to the menu item "Language" and open it.
• Select your language on the right and confirm the selection.
b) WiFi
If you do not want to connect the box to your network and the Internet by LAN, you can
now set up WiFi access.
• Open the settings first. For this, click the gear icon on the home screen.
• If WiFi is deactivated, click the slider until it is set to On.
• Now you can select the desired WiFi network on the right.
• Once you have clicked the WiFi, you need to enter the WiFi key. Do this with the
keyboard.
• Last, click "Connect"".
• Alternatively, you can use the WPS connection as well. For this, click the two arrows
placed in the circle above. This starts WPS.
Then start WPS on your router as well. You usually have 120 seconds for this.
38