Network; Voltage Supply - Renkforce 1317447 Mode D'emploi

Connection via the video output
• Plug the 3.5 mm jack plug of the enclosed video cable into the AV socket A1 of the
TV-Box.
• Now connect the other end of the cable to the video input of your TV or screen. The
yellow cinch plug must be connected to the socket video, the red cinch plug to the
socket audio right and the white cinch plug to the socket audio left.
• Switch on your TV or screen and switch to the video input. For this, observe the oper-
ating instructions of your TV or screen.
b) Network
You may connect the product either via LAN or via WiFi to your network and the inter-
net. If you have the option of connecting the box by LAN, we recommend using this
since the speed and stability of a LAN cable is usually much better.
If you want to use WiFi, you can skip this item. Set up WiFi after commissioning right in
the operating system. For this, observe chapter 10 b) of these instructions.
• To connect the TV-Box to your network by LAN, connect a 1:1-connected network
cable to the RJ45 socket A4 of the box.
• Now connect the network cable to a free LAN connection router or network switch.
• You may need to activate the LAN connection in the system first. You will find the
menu item in the settings.
c) Voltage supply
Once you have connected everything, you need to connect the TV box to the power
supply.
Please observe that the system will start up as soon as the box is powered up. Of
course, you can connect or disconnect devices and cables in operation.
• Connect the output of the enclosed plug-in mains adapter to the intended socket A5.
• Now plug the mains adapter into a mains socket.
• The system starts automatically.
33