Procheck TH FR1DB1 Mode D'emploi page 12

Acoustic:
Memory:
Backlight:
Operating
temperature:
Storage/transport
temperature:
Automatic
Switch-off:
Battery:
Dimensions:
Weight:
Standards:
According to the Medical Product User Act a biennial technical
inspection is recommended for professional users.
Please observe the applicable disposal regulations.
11
a. The unit is turned ON and ready for the
measurement: 1 short «bi» sound.
b. Complete the measurement: 1 long beep
(1 sec.), if the reading is less than 37.5 °C
(99.4 °F), 10 short «beep» sounds, if the
reading is equal to or greater than 37.5 °C.
c. System error or malfunction: 3 short «bi»
sounds.
a. Auto-Display the last measured
temperature when switched on.
b. 12 readings recall in the Memory Mode.
a. The display will be lighted GREEN for
4 seconds, when the unit is turned ON.
b. The display will be lighted GREEN for
5 seconds, when a measurement has been
completed with a reading less than
37.5 °C (99.4 °F).
c. The display will be lighted RED for
5 seconds, when a measurement is
completed with a reading equal to or
higher than 37.5 °C (99.4 °F).
16 °C to 40 °C (60.8 °F to 104 °F)
-20 °C to +50 °C (-4 °F to 122 °F)
Approx. 1 minute after last measurement has
been taken.
CR2032 BATTERY (X1) - at least 1000
measurements
122.36 mm (L) x 42.20 mm (W) x 43.11 mm (H)
49 g (with battery), 45.8 g (w/o battery)
Complies with ASTM E-1965-98
requirements