Publicité
Montageanleitung (Original) /
Installation instruction (translation from original)
gesis® KNX FLEX-ENO32B
EnOcean-KNX-Gateway 32 Kanäle /
EnOcean-KNX-Gateway 32 channels
Abbildung 1: Bedien- und Funktionselemente /
Figure 1: Operating and functional elements
Abbildung 3: Montage Buchse/Stecker BST14i2 (93.421.0553.1/ 93.422.00553.1)
1. Kabel abisolieren und ablängen.
2. Buchse/Stecker aufklappen und Drähte in Federkraftkontakte einführen.
(rot = Plus; schwarz = Minus)
3. Buchse/Stecker zuklappen und mit hörbarem Klick einrasten.
Doc. # BA001165 – 11/2020 (Rev. B)
Wieland Electric GmbH
Brennerstraße 10 – 14
96052 Bamberg
Phone +49 951 9324-0
83.020.0628.2
Fax
+49 951 9324-198
info@wieland-electric.com
www.wieland-electric.com
Abbildung 2: Montage des Moduls /
Figure 2: Module installation
Figure 3: Installation of socket/plug BST14i2 (93.421.0553.1/ 93.422.00553.1)
1. Remove the insulation and cut to length.
2. Flip open the socket/plug and lead in wires to the spring contacts.
(red = plus; black = minus)
4. Fold socket/plug closed and latch with audible click.
gesis® KNX FLEX-ENO32B
2 DE /
EN
Publicité
