Replacing Led Strip; Sawdust Chambe; Disc - Bona Edge UX Mode D'emploi

Routine Maintenance (Cont.)

Replacing led strip

1.
Follow the 'Graphite brushes'
(pag.17) up to point 3.
Replacing dust capture strip
1.
Follow the 'Replacing the
cogged belt' (pag.16) up to
point 3.
Sawdust chamber
Hoover the sawdust from the chamber regularly to prevent the hazardous accumulation of dust.

Disc

Check the disc surface regularly. Remove any dirt.
2.
Remove 2 screws on the led guard and replace led strip.
2.
Remove 2 screws on the side arm and internal plate.
Bona Edge UX
3.
Reassemble all parts.
19
EN