ENERGY SISTEM ENERGY 3120 Mode D'emploi page 61

PC CONNECTION
≥
In order to enjoy the multimedia capabilities of your MP4 Energy™, you have to first
copy your favourite files from your PC to its internal memory.
Connect your MP4 Energy™ to the computer using the USB 2.0 cable included. The
device will be detected automatically wihout installing any driver (except Windows
98, in which case you have to install the W98 driver from the "SOFTWARE/
Firmware" folder inside your MP4 built-in memory). Once detected, you can read/
write to the device's memory just as if you where using a regular disk drive.
≥
IMPORTANT: To avoid any data loss, always perform a safe USB device extraction
before disconnecting the USB cable from the PC. In Windows XP, for example, you can
find the safe extraction icon in the task bar, next to the system clock.
61