Maintenance, Troubleshooting; Vehicle Maintenance; Battery Maintenance - BH BI200 Instructions De Montage Et Utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Choose Primary mode for beginners, and choose Normal mode for proficient.
1. Select Primary mode during practice.
2. Select a flat, spacious area to practice till you can easily control all the movement.
3. Do not drive in areas with many pedestrians, children, vehicles, obstacles.
4. Keep your body relaxed and your eyes looking forward. For the safety of your own and
others, keep low speed.
Speed alert: When the wheels run too fast, the microcomputer control system will
automatically command the motor to slow down to a safe speed. At the same
time, the vehicle platform will lean back, and the handle bar tilt backward to oblige
the driver to decelerate.
VI. Maintenance, Troubleshooting
1. Vehicle body maintenance
1. Carry: There are precise chips and sensors in this unit. Please gently carry the vehicle
to avoid damage. When you move it, make sure it is power off and disconnected from
the charger. Lift the vehicle from the bottom of the vehicle body.
2. Inspect: Check the handle bar, steering stick and other parts regularly. Make sure all
the parts are tightly screwed.
3. Wheel maintenance: Inspect the tire components regularly, rotate tire by hand to check
whether the tire is loose. If the tire shakes, fasten the screws of all components.
Inspect abrasive degree and abrasive evenness of both tires. If they are severely worn
and torn, please contact service department for replacement.
4. Cleaning: Make sure the power and the charger is disconnected, clean with a soft
cloth. Do not let the water into vehicle body.
5. Keep: please store vehicle at dry, suitable temperature indoor places.

2. Battery Maintenance

• Do not touch any leaking matter.
• Do not allow children and pets touching batteries.
•Non-professionals are not allowed to disassemble the battery while maintenance.
•Comply with relevant laws and regulations while transporting and using the battery.
• Only use appropriate model charger provided by supplier.
• Batteries contain dangerous matter, do not open the battery, and do not inject any matter
into the battery.
• When the battery is over-heating, odorant, leaking, please stop using the battery
immediately and take the battery in a place far away from people.
Please keep the charging port dry.
Please ensure the charging environment cool and dry.
Do not charge when the charging port is wet.
24
BI200-BI220

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bi220

Table des Matières