Driving Operation; Inspect Vehicle Condition; Start - BH BI200 Instructions De Montage Et Utilisation

Do not start or stop in a sudden.
Do not drive at steps, stairs, elevators, escalators, revolving doors.
Do not operate the vehicle when it is connected to the charger.
V. Driving operation
When driving vehicle, please obey local traffic laws and road regulations strictly, select the
appropriate path and road to drive. Do not drive on car lane, rough road, or slippery road.
Must not drive vehicle on the motorized road, rugged road, slippery surfaces. Do not drive
horizontally on a slope, it will be dangerous.

1. Inspect vehicle condition

First, do check the vehicle condition to ensure that all parts are securely connected before
driving.

2. Start

1. Open the battery cover, press the button, switch light turn on, indicating that the power
is on.
2. Press the remote control power switch button A, you will hear a "tick" sound. The lights
flash until the automatic inspection completes. When the 5 LED lights all turn on means
that it is fully charged; the left light under the 5 LED lights means primary mode; the
right light under the 5 LED lights indicates balance system.
3. Press remote control button B to get in the primary mode, which is a slow speed mode,
suitable for beginners.

4. Driving operation

After the vehicle is on, please observe the LED balance indicator light. If the LED
balance indicator light is on, it means you can step on; if the LED balance
indicator light is off, it means you cannot step on or drive.
If the tilt angle of vehicle is bigger, the LED balance indicator light won't light. If you step
on one foot, the vehicle will shake to inform the driver the tilt angle is too big. Pls don't step
on the vehicle to avoid any accident.
1. When the LED balance indicator lights, step one foot on the pedal, the pedal sensors
transfer the signal to the built-in microcomputer system to keep the vehicle body in
balance. The vehicle body will vibrate slightly.
2. Slightly push and pull the handle bar. If you feel resistance force, you can step on
another foot. Try to keep yourself in balance when you are on the vehicle.
3. Lean forward and backward to move the vehicle forward and backward.
22
BI200-BI220