Proctor Silex 48578 Mode D'emploi page 7

Programming
To Set Clock:
1. Plug in coffeemaker. Numbers
on clock will flash until you set
time of day.
2. To set time of day, press H
(hour) button to set current hour.
AM or PM will be displayed.
3. Press M (minute) button until
you reach the current time.
To Set and Use Automatic Brew:
1. Make sure clock is set for correct time of day.
2. Fill coffeemaker with desired amount of water and coffee.
Place carafe with lid on keep-hot plate. Close lid.
3. While holding PROG (program) button, press H and M
buttons until desired brewing time is reached.
4. Once desired brewing time has been reached, release
PROG button and current time is displayed.
5. Press AUTO button to set coffeemaker to come on
automatically at the desired time.
6. An illuminated green light on the AUTO button indicates
that the brew cycle will begin at the set time.
7. Press AUTO button again to cancel automatic brew.
840218400 ENv02.indd 7 840218400 ENv02.indd 7
7
5/23/12 1:30 PM 5/23/12 1:30 PM