THOMSON MIC192U Mode D'emploi page 19

BLUETOOTH
SLEEP MODE
In playback mode
• Press SLEEP repeatedly to select duration: 90, 80, 70,
60, 50, 40, 30, 20, 10 minutes.
• The device turns automatically off when the time set
has elapsed.
• Press SLEEP again to disable this feature before the
end of the selected period.
Note: You can see how much time remains by pressing
SLEEP.
ADJUSTING THE VOLUME
Press / on the unit or VOL + / - on the remote to
adjust the volume.
SOUND OFF MODE
Whilst the sound is playing, press
or on.
EQUALIZER
Press EQ repeatedly to adjust the sound according to the
type of music:
FLAT POP CLASSIC
USING THE CD PLAYER
Note: before using the CD player for the first time, remove
the cardboard lens protector from the CD compartment
Playing a CD:
• Press FUNCTION or
• Press to open the CD compartment door and insert
a CD (printed side toward you).
• Press to close the CD compartment door.
• Press 12 to start playback or pause.
• Press 7 or 8 to skip a track forward or back.
• Press and hold 7 or 8 to move forward or backward
on the track currently playing.
Note:
• If there are multiple folders on your MP3 CD, press
successively FOLDER «F01» appears on the screen
indicating a file number.
• To skip 10 tracks at a time, press +10.
Repeat mode
Press FM ST / MODE successively:
• NORMAL: stops repeat mode.
• REPEAT ONE: repeats one track.
• REPEAT ALL: repeats all tracks.
• REPEAT FLD: repeats folder (MP3 files only).
• RANDOM: randomly selects tracks to play.
CD:
REP 1 REP ALL
MP3:
REP 1 FOLDER
MICRO SYSTEM
®
MIC192U
to turn the sound off
ROCK JAZZ
(2).
to select the CD mode.
RANDOM
REP ALL RANDOM
PROGRAMMED PLAYLIST
Programmes up to 20 tracks in a defined order:
• The CD or USB must be stopped.
• Press PROG / PRESET: "P01" will be displayed on the
screen.
• Press the 7 or 8 buttons to choose a track.
• Press SELECT to store each track (up to 20).
• Press 12: the device plays the tracks in the
programmed order.
• To cancel the programmed playlist, press 3.
USING THE RADIO
• Press FUNCTION to select TUNER mode.
• Set the radio to the desired station using the 7 or 8
buttons: the frequency is displayed on the LCD screen.
• Press 7 or 8 for 2 seconds to show all the
frequencies, then release to start automatic scanning:
the search will automatically stop when the radio picks
up the nearest station.
Note: to improve reception, use the FM antenna at the
back of the device.
PROGRAMMING RADIO STATIONS
Manual programming:
• Select the station you wish to save.
• Press PROG / PRESET on the remote: the program
mode (P- 01) will be displayed.
• Press w or s to select a program number.
• Press SELECT to memorise each station (maximum
20).
• To listen to preset radio station, press w or s on the
remote control.
USING THE AUX-IN
The MP3 Connect input allows users to listen to an external
audio source (MP3 player, Smartphone, portable CD player,
etc):
• Plug a 3.5/3.5 mm audio cable (not included) into the
MP3 Connect input on the back of the device, then into
the headset input of an external auxiliary audio device.
• Press FUNCTION successively: to select AUX-IN
mode.
• Play music from the external peripheral device.
USING THE USB PORT
The device is equipped with a USB port (18) to play music
files (MP3) stored on a USB stick.
• Put a USB stick in the USB port (18) of the player.
• Press SOURCE repeatedly to select "USB".
The play functions in USB mode are identical to those for
a CD.
Note:
• Do not remove the USB stick while the files are playing,
as this may damage them.
• We recommend saving the contents of the USB stick to
avoid the loss of data.
• CAUTION: Maximum capacity: 32 GB. The player is
not compatible with all USB devices (eg. external hard
discs, etc.).
Loading
The USB port provides up to 600 mA.
This allows you to load your mobile phones or tablets.
Note:
• This unit does not support Apple products.
USE
17 EN EN