Installation; Automatic Channel Scan (Retune) Menu Operation; Manual Tuning; Digital Manual Search - Salora 22LED7005TD Mode D'emploi

To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts.
Note: You can press "MENU" button to cancel.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN,please select
"Yes" and than press "OK".
• Press OK button to quit channel list and watch TV.

Installation

Press "MENU" button on the remote control and
select Installation by using " " or " " button. Press
OK button and the following menu screen will be
displayed.
02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_22970WLED_10074322_50193845.indd 53 02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_22970WLED_10074322_50193845.indd 53
Select Automatic Channel Scan (Retune) by using
" "/" " button and press OK button. Automatic
Channel Scan (Retune) options will be displayed. You
can select Digital Aerial, Analogue or Digital Aerial-
Analogue tuning using " "/" " and OK buttons.
Automatic Channel Scan (Retune) Menu
Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confi rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
• After auto channel scan type is set and selected
and confi rmed, installation process will start and
progress bar will move along. Press "MENU" button
to cancel process. In such a case, located channels
are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using " "/" " and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired
" button. Manual search options will change
accordingly. Use " "/" " button to highlight an item
and then press " " or " " button to set an option.
You can press "MENU" button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
English - 53 -
Search Type using " " or "
28.06.2011 15:36:00 28.06.2011 15:36:00