M-Audio OXYGEN PRO 49 Guide D'utilisation Rapide page 2

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Quickstart Guide (English)
Introduction
Box Contents
Oxygen Pro 49
USB Cable
Software Download Card
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.
Setup
To start using your Oxygen Pro 49, you need to connect your equipment, get your software properly
configured, and then set the keyboard's operation Mode.
To connect Oxygen Pro 49 to your computer, use the included USB cable. Plug the USB-B end of
the cable into the keyboard and the USB-A end of the cable into your computer (or into a USB hub
connected to your computer).
Note: In addition to sending data, the USB cable powers the keyboard. If you will be connecting
Oxygen Pro 49 to a USB hub that has other devices connected to it, then we recommend using a
powered USB hub.
To configure your DAW to work with Oxygen Pro 49, enable Oxygen Pro 49 as a MIDI control
surface in the appropriate settings menu within the DAW (Preferences, Options, Device Setup,
etc.).
If you will be using Oxygen Pro 49 with the included MPC Beats, Pro Tools | First M-Audio Edition
or Ableton Live Lite software, see
Installing Your Included Software
for more specific instructions
on configuring your DAW with Oxygen Pro 49. If you will be using a different DAW, consult the user
manual provided with the DAW for additional help with this step.
If you will be using Oxygen Pro 49 with a hardware synth rather than your computer, connect
Oxygen Pro 49's MIDI Out port to a synth with a standard 5-pin MIDI cable. Then make sure that
Oxygen Pro 49 is set to operate with one of its custom presets selected (as instructed in
Setting the
Keyboard's Operation
Mode) and that the Oxygen Pro 49 is set to send MIDI data from the 5-pin
MIDI out port in the Global Settings. In order to use an external hardware synth, you will need to
connect Oxygen Pro 49 to a computer, laptop, or to a powered USB hub.
2

Publicité

Table des Matières
loading

Table des Matières