Preventive Maintenance; Repair; Warranty; Storage - Bevel Tools Bevel Mate ABA-12 Mode D'emploi

4.1 Preventive maintenance

i
• Keep air tools clean and stored safely after using them.
• Keep the thread and grooves on the bearing housing and the internal thread of the flange head clean to prevent
jamming and premature failure of the ball screws.
• When air tools need repair, air tools should be checked by the manufacturer or the licensed agent. Repairing by the
operator can cause failure and serious damage to the air tool and the operator.
• When replacement parts are needed, only approved parts from the manufacturer should be used. Unauthorized
parts can cause failure and serious damage to the operator and the machine.
• When special tools are needed for disassembly or re-assembly of air tools, inquire to the licensed agent or
manufacturer.
• Vent the pressurized air out for purification from the air tank every day and mount air filter at the tank inlet.
• Supply proper lubricants for air tools every day to protect against the acid causing damage to inner parts.
• Do not use improper or broken hoses or connectors.

4.2 Repair

If despite strict observance of the manufacturing and testing method the tool should happen to fail, it must be
repaired by an authorized agency.
i

4.3 Warranty

Beveltools machines have been manufactured to quality standards and carefully inspected before shipment. The
warranty period for all Beveltools machines is 12 months from the original date of purchase. If repair is required,
the user must return the complete tool to the manufacturer or nearest authorized dealer. Complaints can only be
honoured if the machine is returned in the undissembled condition, with copy of the purchase invoice and clear
description of the problem. If inspection shows an original defect in material or workmanship Beveltools will repair or
replace the tool without charge during the warranty period.
The warranty does not apply to normal use or wear and tear. In the event of the tool being improperly handled, used
for purposes for which it is not intended and/or if the service and maintenance instructions not being observed by
authorized persons, no warranty shall be in effect for damages/consequential damages.
Beveltools reserves the right to make changes or improvements to its products. Beveltools is not obligated to make
any corresponding changes or improvements in products previously manufactured or sold.

4.4 Storage

Temperature range during operation
Max. relative air humidity

4.5 Disposal / environmental compatibility

Air tools consist of steel, iron, bronze, aluminium, rubber or some others. Be careful not to contaminate humans or
environment when air tools are disposed. This machine consists of materials which can be disposed of in a recycling
process. Before disposal, render the machine unusable. Do not throw the machine into the garbage collection.
According to national regulations this machine must be disposed of in an environmentally compatible recycling
process.
EN
-15°C up to +50°C
90 % at + 30°C
65 % at + 50°C
5