ADEO SCREEN Cinema Curved PFIXCINEMACUR Série Manuel D'installation page 25

FRAME ASSEMBLY SCREEN
5- Insert the other screws on the corners without fastening them completely. Then fix each corner by inserting the
heads of screws into the profile groove like image below. REMEMBER TO INSERT BEFORE THE CORNERS FOR THE
STIFFENERS.
6
Fix the vertical profiles and the stiffeners on the TOP profile. Then assembly the BOTTOM
horizontal profile (following the procedure described in point
the end fix the BOTTOM horizontal profile to the brackets already mounted on the wall.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: CINEMA CURVED Installation Manual rev2 |08.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
1
) and fix it on the vertical profiles. In
Page 25