ADEO SCREEN Cinema Curved PFIXCINEMACUR Série Manuel D'installation page 24

FRAME ASSEMBLY SCREEN
5
Assembly the vertical profiles.
1- Take the vertical profiles and place them close to each other.
2- Fix together the screws and the nuts, don't fasten them completely.
3- Insert the heads of the screws in the profile grooves and then fasten them completely.
4- Insert the connector M8 (in the KIT) in the stiffeners profile and fix them with the screws without head like image
below.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: CINEMA CURVED Installation Manual rev2 |08.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
Page 24