Error Codes - Pelgrim GVW487ONY Mode D'emploi

ERRORS

Error codes

Problem
Code E1 is showing in the
display
Code E4 is showing in the
display
Code E8 is showing in the
display
Technical data sheet
EN 24
Potential causes
Water intake time is too long.
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department. If all indicators
are flashing simultaneously: switch off the dishwasher immediately,
shut off the inlet tap and alert the service department.
Sheet of household dishwasher according to EU Directive 1059/2010:
Manufacturer
Type / Description
Standard place settings
Energy efficiency energy efficiency class (1)
Annual energy consumption (2)
Cleaning efficiency class
Drying efficiency class (4)
Energy consumption of the standard cleaning cycle
Standard cleaning cycle
Program duration of the standard cleaning cycle (5)
Power consumption of off-mode
Power consumption of standby-mode
Annual water consumption (3)
Noise level
Mounting
Height
Width
Depth (with connectors)
Solution
Inlet tap not opened.
Note the code and alert the service
department.
Note the code and alert the service
department.
Pelgrim
GVW487ONY
14
A++
266 KWh
A
A
0.93 KWh
ECO 45 ºC
195 MIN.
0.45 W
0.49 W
2800 L
44 dB(A) re 1pW
Build-in
81.5 cm
59.8 cm
55 cm