Troubleshooting; Reciclying And Disposing; Guarantee - Greencut SOLDADOR MMA180 Manuel D'utilisation

40

TROUBLESHOOTING

The table includes some of the most common problems, their causes and remedies.
PROBLEM
The power indicator is not lit and the fan does not work.
The power indicator comes on but the fan does not
work.
The overload warning light comes on as soon as the
welder is connected.
The fan is working, but the power indicator light does
not come on and there is no power.
The fan works, the power indicator light comes on but
there is no power.
NOTE: If you can not solve the problem, contact an Authorised Service Centre.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources. Dispose of the device in an environmentally friendly manner. Do not
dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this
appliance to an approved recycling centre (green dot).
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.
SOLUTION
• Check the ON/OFF switch.
• Check the connections of the machine.
• Connection of loose cables.
• Problems in the circuit. Take the machine to an
Authorised Service Centre.
• Main circuit failure. Take the machine to an
Authorised Service Centre.
• Possible connection to the wrong power switch.
• Take the machine to an Authorised Service Centre.
• Main circuit failure.
• Take the machine to an Authorised Service Centre.